RSS
Мир нефтепродуктов. Научно-технический журнал
Рус
|
Eng
Главная
Мероприятия
О Журнале
Контакты
Редакционный совет
Авторам
Рекламодателям
DOI
2024
1-2024
Effect of domestic and foreign additives on the quality of diesel fuel depending on their dosage
Chemmotology as a science and its possible prospects
The Content and Application of ACEA Oil Sequences for Light-Duty and Heavy Duty Engines issued in 2021–2022 years
Options for upgrading the technological scheme of the process of fractionation of limit gases in order to save energy and increase the production of highly liquid products
High-octane components of motor gasolines as a solution to Russia’s fuel supply problems
Development and testing of energy-saving lubricant M-6Z/14D2K for highly loaded diesel engines
2-2024
Evaluation of the effectiveness of sulfonate additives in lubricating oils
The effect of the technology for producing jet fuels on their hydrocarbon composition
Practical recommendations for vacuum distillation column calculation and its residue entrainment impact on vacuum gas oil quality estimation
Study of the amidation reaction of carboxylic acids and their derivatives
Features of the use of primary reference fuels used in diesel engine tests at IDT-90 installations
Study of bitumen modifier based on low molecular weight rubbers
Ways to develop hydrogen production technologies within the framework of the ESG concept
3-2024
LUBRICANT COMPOSITION FOR GEARBOXES
LOW-TEMPERATURE CATALYTIC CRACKING OF FUEL OIL WITH HYDROGEN DONOR (METHANE) AS AN ALTERNATIVE METHOD FOR PROCESSING HEAVY OIL RESIDUE
CO-PROCESSING OF PETROLEUM FEEDSTOCK AND BIO-OIL BY DELAYED COKING
INVESTIGATION OF THERMAL TRANSFORMATION OF VACUUM RESIDUE IN THE PRESENCE OF REGENERATED SPENT HYDROTREATING CATALYST
ASSESSMENT OF THE EFFECT OF TAR ADDITIVES ON PROPERTIES BITUMEN
METHOD OF ELECTROCHEMICAL NEUTRALIZATION OF NATURAL GAS ODORANT STORAGE TANKS
STUDY OF THE RHEOLOGICAL PROPERTIES OF BASE OILS THICKENED WITH POLYMER ADDITIVES AT DIFFERENT TEMPERATURES
PROBLEMS OF CONFORMITY ASSESSMENT OF JET FUEL IN CONDITIONS OF SANCTIONS RESTRICTIONS
ENVIRONMENTAL FRIENDLY MOTOR OILS
4-2024
RESEARCH OF ALTERNATIVE COMPONENTS OF ADDITIVE PACKAGE FOR TURBINE OILS
SOME ASPECTS OF TESTING FUEL FOR INTERNAL COMBUSTION ENGINES
CURRENT ISSUES OF ENSURING SAFETY OF PRODUCTION FACILITIES ORGANOALUMINUM COMPOUNDS AND WAREHOUSES OF ORGANIC PEROXIDES
ECONOMIC AND STATISTICAL ANALYSIS OF MODERN APPROACH TO RUSSIAN REFINERIES PERSONNEL MANAGEMENT AND STAFF POLICY
APPLICATION OF NICKEL CATALYSTS IN HYDROGENATION REACTIONS OF UNSATURATED HYDROCARBONS
INVESTIGATION OF THE COMPOSITION AND PROPERTIES OF NATURAL BITUMEN
FORMALDEHYDE-CONTAINING HYDROGEN SULFIDE ABSORBERS AS THE MAIN CAUSE OF DEPOSITS FORMATION OF PRIMARY OIL REFINING PLANTS EQUIPMENT
SULFONATE ADDITIVES TO MOTOR OILS
THE EFFECT OF PHOSPHORUS-CONTAINING ADDITIVES ON THE PERFORMANCE PROPERTIES OF ALKYLPHENOLATE GREASES
PILOT TESTING OF TURBINE OIL TANECO TURBINE 32 ON AN AEROKOM 43-125/10.2 UHL TURBOCOMPRESSOR
DOI 2023
№7 2023
HETEROATOM-CONTAINING ALKYLPHENOLYATES AS MULTIFUNCTIONAL ADDITIVES TO LUBRICANT OILS
DEVELOPMENT OF A METHOD FOR PRODUCTION OF PETROLEUM CERESINS BY DEEP DE-OILING OF PETROLATUMS
THE USE OF SCHIFF BASES AS CORROSION INHIBITORS
INSTALLATION TO PREVENT THE FORMATION OF EXPLOSIVE CONCENTRATIONS OF LIQUEFIED PETROLEUM GASES DURING THE DISCHARGE/FILLING OF THE TANKER TRUCK
SOLUBILIZATION OF WATER WITH DETERGENTS
OPERATIONAL ASSESSMENT OF THE QUALITY OF MOTOR OILS
№5 2023
Low-ash motor oils: technologies and application trends
Synthesis of benzotriazole derivatives and their effect on antioxidant properties of synthetic lubricant oil
Optimization of the process of obtaining aminomethoxy derivatives of menthol
Study of the catalyst ZSM-5, modified Zr, for the alkylation process of oil distillate fractions
Fuel gas production technology for the oil refining industry
Haw to resolve the conflict between accuracy and reliability, completeness and timeliness of measurement information
Optimization of the catalytic cycloalkylation process of phenol with 1-methylcyclopentene
Software tools for planning and optimization of technological schemes of refineries
Calculation of the effectiveness of the actual detergent effect of detergents
№ 4-2023
Research of rheological properties of polymer-bitumen binders
Heat Treatment of Middle Distillate of Fluid Catalytic Cracking
Analysis and comparison of russian petroleum refining technologies
Assessment of the effect of fuel composition stability on CO2 emissions from refinery process furnaces
№5 2023
Investigation of the effect of polymer bitumen binders on road bitumen
Creation of new lubricating compositions based on waste oil regeneration product
A fundamental possibility of assessing the persistence of oils
№3-2023
Oil is an object of research. Analytical solutions
Investigation of new macroporous catalysts in the process of phenol alkylation by ethylene oligomers
Extraction of phenol from phenolcontaining waters when using extractants
The possibility of obtaining promising road bitumenes of PG grades under the conditions of the project for the installation of AVT-6 PJSC Bashneft-Ufaneftekhim
Obtaining modern brands of road bitumen in the conditions of deepening oil refining at the JSC «SNPZ»
Physico-chemical characteristics of oil samples of the Tagulskoye field
Evaluation of the reactivation efficiency of hydrotreating catalysts
The Central Volga Research Institute on Petroleum Refining: Achievements of Science for the Benefit of Production
Innovative achievements and developments of JSC «MidVolgaNIINP», implemented and planned for implementation
Development of engineering and technological support of oil refining processes
Development of the composition and technology for obtaining a synthetic component of the basis of hydraulic oils for special equipment
Experience in developing domestic packages of additives to hydraulic oils for industrial equipment and machinery
№2-2023
Chemmotological evaluation of oils and additives
Tech-economic evaluation of the use of oxygen-enriched stream of air for the combustion process in furnace heaters in order to decrease carbon emissivity
Synthesis and study of new thiocarbonic and thiocyanic acid derivatives as extreme pressure additives to motor oils
Review of the production of alkylphenolic lubricant additives
Catalytic Cracking Heavy Gas Oil Thermolysis
Investigation of thermal transformation of fuel oil in the presence of regenerated spent hydrotreating catalyst
Synthesis of 2-hydroxy-5(3-methylcyclohexyl)aceto- and benzophenones in the presence of a nano-catalytic system
Catalytic cycloalkylation of 4-hydroxyphenylpropionic acid methyl ester with methylcycloalkenes
№1-2023
Evaluation of the effectiveness of the developed package of additives PH-SL for engine oils for modern gasoline engines
Synthesis of ep additives based on toluene sulfo chloride and methyl-, allyl xanthogenates
Principles of Development of a Set of Methods for Assessing Additives to Oils
Analysis of petroleum product production and consumption prospects in the Russian Federation
Medium alkaline alkylphenolate additives
Development of Engineering Solutions on Upgrading Quality of Products up to Standard Requirements at Design Capacity at Gas Processing Plants
Reducing coke formation at visbreaking units with the introduction of a passivator
Production components of motor fuels by processing blends of straight-run diesel fraction and sunflower oil on a zeolite catalyst
DOI 2022
№1-2022
Overview of domestic developments in the field of anti-wear additives for diesel fuels with low sulfur content
Two-stroke gasoline engine lubricants
Dependence of properties of bituminous binders on composition of raw materials and conditions of oxidation
Comparative research of furnace tube of steam reforming
The marginality of processing straight-run fractions of a modern oil refinery
Aromatic hydrocarbons of Azerbaijani oils and their impact on the performance of lubricating oils
№2-2022
Synthesis of esters of oxypropylated 2,2,5,5-tetramethylolcyclopentanol and investigation of them as base of promising lubricating materials
Optimization of the process of catalytic alkylation of cyclopentadiene by cyclohexyl alcohol
Biotechnological method of cleaning oil-contaminated soils
Study of oil fractions from petroleum of the Western Absheron field for their rational use
Synthesis and transformations of co-oligomers styrene with di-olefins modified by glycidyl ethers of 4-izopropenylphenol
Technical and environmental aspects of the new requirements for the performance properties of promising motor oils
The Modern Viscosity Modifiers of Engine Oils
№3-2022
Investigation of the process of coke formation with the introduction of specialized additives at tarp wismbraking installations
Synergetic effect in modification of oxidized road bitumens of different group composition
The composition and properties of oil fractions of unique azerbaijan oils (review)
Features of the I-IV groups of aromatic hydrocarbons of theWest-Aрsheronoil
Corrosion tests of working — preservation oil in various climatic zones
Some recommendations for improving the effectiveness of the assessment of the neutralizing ability of motor oils
Kinetic approach applied to the study of tribological characteristics of sulfonate greases
Engine oils aeration
№4-2022
New requirements for the properties of promising oils for automotive diesel and gasoline engines and methods of their testing
Obtaining mixed solvents from gas condensate
Status and possible prospects for the development of the domestic methodology for testing and evaluating motor oils
Industrial application of hydrogenation processes in processing of heavy residues of oil distillation by the example of TAIF-NK JSC
Optimization of the process of phenol alkylation by isoprene cyclodimer in the presence of KU-23 catalyst at a continuous operation plant
Study of bitumen cooling process in an above-ground tank in order to develop technologically and energetically efficient methods of maintaining its temperature
Stabilization of processes of thermal oxidative destruction of sealed liquids during operation
Changing the properties of narrow fractions in the process of hydrotreating light coking gas oil
№ 5-6-2022
Effects of a reaction chamber on Visbreaking product stability
Synthesis and research of xanthogenic acid derivatives with different polar groups as additives to transmission oils
Study of propargyl ethers of aminomethylated alkenylphenols as corrosion inhibitors of ferrous metals
The results of the study of the effect oxidation processes on the viscosity-temperature characteristics of partially synthetic motor oils
Study of the kinetic regularities and mechanism of the cycloalkylation reaction of phenol with 1-methylcyclopentadiene
Optimization of the process of acylation of para-(1-methylcyclohexyl) phenol with acetic acid in the presence of the nano-catalytic system
Evaluation of the possibility of TOFA in the composition of anti-wear additive to diesel fuel with other vegetable oils
Improvement of physico-chemical properties of the straight run diesel by means of a magnetic field
Comparative study of protective and anticorrosive properties of sulfonate and phenolate greases
Evaluation of physico–chemical parameters of the sealing liquid AG-4I from the hot water tank of JSC “GSR CHP”
DOI 2021
№1-2021
Method for calculating the thrust and specific thrust of a double-flow gas turbine engine based on the results of tests at the laboratory unit «Flame»
Industrial technologies for processing waste oils
Study of the reactions of interaction of alkylxanthogenates with chlorine derivatives of glycerin and study of lubricating properties of synthesized compounds
Pre-fractionation concept in the scheme of straight—naphtha fractionation
Development prospects for the production of Russian biodegradable lubricants based on group V base oils
Study of the adsorption of anti-wear additives on the surface of butosyl in oil dispersions
Transformation of right-running gasoline fraction and gaskondensate on bimetallic catalysts based on zeolit ZSM-5
Determination of Organic Chloride Content in the Specialty Oilfield Chemicals Used in the Crude Oil Extraction, Transportation and Refining by X-ray Fluorescence Spectrometry
Production of alkylsalicyl acids by carboxylation of alkylphenols
№2-2021
Isomalk-3 and Isomalk-3R Technologies for Production of Individual Light Paraffins as the Feed for Petrochemical Facilities
Investigation of the qualities of some promising oils of the Absheron oil and gas region
The study of the qualities of light and oil fractions of Azeri oil
Influence of the synthesis method of tert-butylated triphenyl phosphates on the operational properties of fire-resistant fluids
Spectroscopic studies of oil products west-absheron oil fractions
Differences in the power parameters of diesel engines with a high pressure fuel pump and a battery fuel system for some types of fuel
Modern evaluation methods thermal oxidative stability of reactive fuels in dynamic conditions and prospects for their development
Stady of the thermal-oxidative stability of synthetic oils for aircraft gas turbine engines and helicopter gearboxes
The Necessity for Achieving Conformity of the Russian Turbine Oil Analysis Regulations with the Modern International Standards
№3-2021
Features of production and application of sulfonate greases
The Effect of Inorganic Solid Particles and Water on the Results of a Sulfur Content Measurement in Crude Oil with an X-ray Fluorescence Spectrometry
Development of technical requirements for the properties of automotive engine oils, taking into account trends in climate protection on the planet
Synthesis of s-tetramethyl–, ethylammonium-o-butylxantogenates and study of them as antimicrobial additives to lubricant-cooling fluids
Development of technology for producing base oil and environmentally friendly petroleum plasticizer
A study of thermal and antiwear properties of the oil compositions involving a condensed alkylphenol detergent additive
Upgrading of Heavy Oil under the exposition of Supercritical Water at Different Temperatures
Formulating regression equations for the virtual analyzers of the main quality factors of the alkylation process
№4-2021
How to certify reference materials: by voting or by exact weights
Effect of reaction time on the process of upgrading heavy oils in the presence and in the absence of oil soluble catalysts at 250 ° C
MELANGETM technology of the bitumen production in one-stage without oxidation
Overview of modern multifunctional gasoline additives. Market, key components, and methods for evaluating their effectiveness.
Digital monitoring system of equipment for the analysis of fuel and lubricants quality
Mixed esters of xanthogenic acids containing carbonyl, dithiocarbamine and thiocyane group and their research as additives improving tribological characteristics
№5-2021
Features of technical requirements for operational properties automotive engine oils in new specifications
Study of the composition and environmental aspects of the use of pyrolysis distillate of the Ustyurt gas chemical complex
Influence of surfactants on the wettability of watered viscous oils of some fields in Azerbaijan
Involvement of products of thermal processing of polymer waste into the raw material pool of oil refinery plants
Issue of kerosene supply into live reflux flow of main rectification column of atmospheric vacuum pipestill process units
Comparative evaluation of various testing methods for FCC catalysts
Study of phosphorus-containing compounds as anti-seize and anti-wear additives for transmission and engine oils
Features of the modern process of evaluation of motor oils References
Comparative assessment of the qualities of commercial and synthetic transformer oils
№6-2021
Chemical and phase analysis of carbon deposits in the light of the development of compositions for the maintenance of automatic small arms
To the issue of the system of admission of new petrol, oil and lubricants for use in various types of equipment
Composite rubber — polymer — bitumen binder based on the feed materials obtained by MELANGE TECHNOLOGY
Research of electric conductivity of esters of (C4-C10) terminal dicarboxylic acids depending on their chemical structure
Research of gas permeability of protective liquids of hot water supply tanks
Prediction of unit operation of vacuum distillate catalytic cracking using a non-stationary mathematical model
Determination of optimal conditions for hydrogenolysis of sulfur compounds of straight-run jet fuel
DOI 2020
№1 2020
Industry 4.0. The main development directions of digitalization in refinery
Conceptual model of information system of Project Information Management
Cleaning of oil from hydrogen sulfide in hydrocyclone processors
Tert-butylated triphenyl phosphate — prospective synthetic fire resistant turbine fluid
Study of the technology of high-octane gasoline components with improved environmental properties
№2 2020
Effect of the design and technological parameters of a linear alkylbenzene sulfonation film reactor on the formation rate of by-products using the mathematical modeling method
Problems of regeneration of used oil oils
№3 2020
The modeling of Kazakhstan and West Siberian oil mixture vacuum gas oil catalytic cracking industrial unit
Changes of composition and quality indexes of diesel fuel versus the time of its oxidation and storage
Modification of low-octane gasoline to improve its environmental performance
Synthesis of new chloro derivatives of 1,3-dioxolane and obtaining on them basis load-carrying additives
Global requirements for properties and test methods engine oils for new engines
Engine Oil Licensing and Certification Systems in USA and Europe
Test Method for Stability Features of Aviation Hydraulic Fluids
№4 2020
Associated gas purification of hydrogen sulfide reagent «DARSAN-N»
Influence of Operational Factors on Evaluating Method Indicators of Thermal Oxidative Stability of Aviation Kerosene Under Dynamic Conditions
Explanation of Standard Specification for Performance of Active API Service Category Engine Oils
Thermolysis mechanism of fuel components for jet engines
Nanosized additives in lubricant
Modern environmental requirements for lubricating oils
№ 5 2020
Development trends of lubricants in Russia
Environmental aspects of the use of lubricating oils and alternative energy sources on the way to improve transport sector of the world economy
Studies on the selection of domestic viscosity additives for multi-grade hydraulic oils HVLP
Equipment Identifying Vapor Leakages and Recovery of Petroleum Product Vapor When Stored
Basic Theoretical Thesises of Chemmotology
Hydraulic oils production technologies development for rocket and space technology control systems
№6-2020
Development of paraffin hydrocarbons isomerization processes
Current state of production of jet engine fuel
Graphene modified greases
The multifunction oil for US Army tank and automotive vehicles
Multifunctional alkylphenolate additives to motor oils
Intensification of the process of obtaining basic bases as the basic components of low-curing lubricants
Development of thickened semi-synthetic engine oil M-5z / 20 AERO for four-stroke gasoline engines aircraft piston of unmanned aerial vehicles (UAVs)
Assessment of ability to varnish turbine oils
Demetallization of oil and its fractions
№ 7 2019
Simulation of enhanced oil recovery fields in the final stages of development
Improvement of the diesel fuel hydrodewaxing process effectiveness by the technological mode optimization through the use of the mathematical model
Problems of formation and separation of abnormally stable oil emulsions at oil treatment facilities
Optimization of the processes of catalytic decarboxylation of petroleum acids
60 лет ПАО «Славнефть-ЯНОС»
Laboratory unit for evaluation of hydrogen sulfide additives-absorbers efficiency
Determination of octane number in the range from 100 to 110 without use of tetraethyl lead
Modernization of bitumen production at SlavneftYANOS PJSC
Study of fractional composition change during hydrotreatment of light coker gasoil at high pressure
Energy efficiency is the future
Repair department of the enterprise: today and tomorrow
Comparison of efficiency of diesel fuel fractions recovery at stages of atmospheric and vacuum oil distillation
Base for drilling fluids. From import substitution to export prospective
Process flow diagram of Slavneft-YANOS PJSC
Public joint stock company Slavneft-YANOS. Development history
Спецномер #2-2021 (ООО «ЛИНК»)
Production Service Centers – A Priority Trend in the Development of the Russian Engineering Centers in the Oil and Gas Sector based on the Sustainable Development Concept
Process service centers as an element of decarbonization strategy of the company
Setting the combustion mode in the refinery steam reforming unit furnaces along with the coiled pipe infrared imager control
The role of engineering centers in the continuous improvement system development at the oil and gas industry companies
The continuous improvement system effectiveness monitoring methods
Implementation of “PRORYV” project for complex improvement of refineries efficiency
LUKOIL Group Oil Refining Facilities Production Activity Planning System Improvement
Machine learning as a tool for optimization of technological processes
Digital information model as the basis for digital transformation of the enterprise
Shutoff and control valves airtightness test of the shutoff member through the ultrasonic testing method under continuous production processes
Application of thermal destruction processes for recycling of polymer waste
The composition and properties of oil fractions of unique azerbaijan oils (review)
Capital repair support
Архив
2023
№1 2023
№2 2023
№3 2023
№4 2023
№5 2023
2022
№1 2022
№2-2022
№3 2022
№4 2022
№5-6 2022
2021
№6 2021
№5 2021
№4 2021
№3 2021
№2 2021
№1 2021
2020
№6 2020
№5 2020
№4 2020
№3 2020
№2 2020
№01 2020
2019
№7 2019
Июнь 2019
Май 2019
Апрель 2019
Март 2019
ФЕВРАЛЬ 2019
Январь 2019
2018
Январь 2018
Февраль 2018
Март 2018
Апрель 2018
Май 2018
Июнь 2018
Июль 2018
Август 2018
Сентябрь 2018
Октябрь 2018
Ноябрь 2018
Декабрь 2018
2017
Январь 2017
Февраль 2017
Март 2017
Апрель 2017
Май 2017
Июнь 2017
Июль 2017
Август 2017
Сентябрь 2017
Октябрь 2017
Ноябрь 2017
Декабрь 2017
2016
Январь 2016
Февраль 2016
Март 2016
Апрель 2016
Май 2016
Июнь 2016
Июль 2016
Август 2016
Сентябрь 2016
Октябрь 2016
Ноябрь 2016
Декабрь 2016
2015
Январь 2015
Февраль 2015
Март 2015
Апрель 2015
Май 2015
Июнь 2015
Июль 2015
Август 2015
Сентябрь 2015
Октябрь 2015
Ноябрь 2015
Декабрь 2015
Подписка
КНИГИ
Цифровизация
Дайджест №1-2024
Главная
»
Password Recovery
Password Recovery
[RM_password_recovery]
Добавить
Type above and press
Enter
to search. Press
Esc
to cancel.